Creative Labs Creative Soundworks 500DAB - Manual (Page 7)

Setting Up Your DAB/FM Radio 2-1
2
Setting Up Your DAB/FM Radio
1. Place the radio on a flat surface, preferably in an interference-free location.
2. Connect the power adapter to your radio and power outlet (Figure 2-1). Turn on the power
outlet, if needed.
SoundWorks 500DAB goes into Standby mode.
• Your DAB/FM radio may
receive radio interference
from electronic devices such
as mobile phones, computers
and televisions, including
their cables, when they are
being used. If you experience
such interference, increase
the distance between the
radio and such devices.
• The power adapter supplied
may vary in different regions,
and is intended for use with
this radio only.
• Disconnect the power adapter
from the wall outlet if the
radio is not used for a long
period.
Figure 2-1: Connecting your power adapter
Nemo UG.book Page 1 Monday, April 25, 2005 10:05 AM