CREATIVE 2030 - Manual (Page 52)

Configuring the Wireless LAN USB Adapter 4-6
Advanced Settings 1. Click the Advanced tab (see Figure 4-6).
2. Click and drag the Fragmentation
Threshold and RTS/CTS Threshold
sliders to the rate you want.
3. The Security box will only be highlighted
when WEP is enabled. Click the
Authentication Type box, and then click
the option that matches your access point.
4. Click the Preamble Type box, and then
click the preamble type that you want.
5. Click the Apply Changes button to save the
settings.
Figure 4-6: Advanced tab
You are advised to use the
manufacturer’s default values.
If you have changed the
original settings, and would
like to return to the default
settings, click the Restore
Defaults button.