Casio fx-9860G SD - Manual (Page 580)

20050401
α
-1-4
Error Message Table
Meaning Message Countermeasure
Invalid Type
Storage
Memory Full
No Card*
SD Card Full*
Invalid file name
or folder name.*
Invalid Card*
Card is
protected*
Data ERROR
Card ERROR*
Data is
protected*
• An illegal data type is specified.
• The storage memory is full.
• There is no SD card loaded in
the calculator.
• The SD card is full.
• Data or folders that are
supported by this calculator
cannot be found on the SD card.
• A card that is not compatible
with the calculator is loaded.
• The SD card is write protected.
• A data error occurred.
• An SD card error occurred.
• The Read Only attribute of the
SD card loaded in the calculator
has been turned on using a
computer, etc.
• Specify valid data.
• Delete unneeded data.
• Load an SD card.
• Delete unneeded data.
• Replace the card with one that
contains data/folders that are
supported by this calculator.
• Replace the card with a
compatible card.
• Remove write protection.
• Check to make sure you are
writing correct type of data and
try again.
• Remove and correctly insert
the SD card and try again. If
this error occurs again,
re-format the SD card.
• Turn off the SD card’s Read
Only attribute.
* fx-9860G SD only