Citizen Systems Citizen CLP 8301 CLP-8301 - Manual (Page 72)

Chapter 9 Specifications
−
58
−
9.2 Interfaces
1 Serial interface
Specifications
Transfer method: Start stop synchronous dual communication system
Signal level: RS-232C
Baud rate: 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200 bps
Data bits: 7 or 8
Start bits: 1
Stop bits: 1 or 2
Parity: Even, odd, or none
Connector: D-SUB 25PIN 17LE-13250-27(D41)(DDK) or its equivalent
XON/XOFF protocol
XON code output requirements:
•
Communication is enabled after power is turned ON.
•
Residual capacity of the buffer is 1K bytes or more after sending XOFF code.
•
Paused state is cleared.
•
XOFF code is output due to error and printer returns to normal conditions.
XOFF code output requirements:
•
Printer is in error.
•
Printer is in paused state.
•
Receive buffer has less than 128 bytes available.
128 bytes
1K bytes
XON code output XOFF code output
Receive Buffer
16KB