Compaq P/N DOC-FB4B User Manual
Page 11
2-3
3.
The diagnostic will search for and connect to correct port ad
dress. If the diagnostic is successful you will receive the following
message (figure 2.3). Click
O.K
. and perform a test scan.
Installing
the
application
software
When the hardware and device driver software are installed, install the
InfoCenter application software from the System Software CD. Please
refer to the
Quick Start Guide
for
InfoCenter
and Image Pals 2 GO!
Image Editor installation instructions. Manuals for both applications
are also included on the Info System Software CD.
Perform Utility Diagnostic
After installing the device driver and application software, check that
your driver is installed at the correct port address by performing a
scanner utility diagnostic. This step will determine if the scanner
is recognized by the computer
1.
Select Info Tech from the program manager in Windows 3.1x or
from the Start menu in Windows 95.
2.
From Info Tech select Scanner Utility check the EPP box and click
on Verify Port in the Utility window.
(Figure 2.2)
figure 2.3