Casio PX700 - Manual (Page 14)

E-12
Recording to and Playing Back from Song Memory
Playing Back from Song Memory
1 Press the SONG MEMORY button so the
PLAY indicator lamp is lit.
2 Use the PART/TRACK button to select the
track you want to play back.
● The indicator lamps above the button show the
currently selected track.
• To play back Track 1, the L/T1 indicator lamp
should be lit.
• To play back Track 2, the R/T2 indicator
lamp should be lit.
• To play back Track 1 and Track 2, both the
indicator lamps should be lit.
3 Press the START/STOP button.
• This starts playback of the track you selected.
• You can change the tempo setting as a track is
playing.
• As a track is playing, you can turn the
metronome on or off using the METRONOME
button.
• You cannot change the tone setting during
playback.
• Press the START/STOP button again to stop
playback.
NOTE
• Data played back from Song Memory is not sent
from the MIDI OUT terminal.
406A-E-014B
Deleting Song Memory Data
IMPORTANT!
• The procedure below deletes all of the data from the
selected track. Note that the delete operation cannot be
undone. Check to make sure you really do not need the
data in Song Memory before you perform the following
steps.
1 Press the SONG MEMORY button so the
REC indicator lamp is flashing.
2 Use the PART/TRACK button to select the
track you want to delete.
• The indicator lamps above the button show the
currently selected track.
• To delete Track 1, the L/T1 indicator lamp
should be flashing.
• To delete Track 2, the R/T2 indicator lamp
should be flashing.
3 Hold down the SONG MEMORY button
until the REC indicator lamp stops flashing
and remains lit.
4 Press the PART/TRACK button.
• This deletes the selected track and enters the
standby state.