6-4 mic/audio1, 6-5 mic/audio2, Mic/audio1 – Panasonic SPX900 User Manual
Page 110: Mic/audio2
110
8-6-4
MIC/AUDIO1
8-6-5
MIC/AUDIO2
The ____ in the Adjustable Range column indicates the preset
mode.
Items/
Data Saved
Adjustable
Range
Remarks
FRONT VR CH1 FRONT
W.L.
REAR
ALL
OFF
Select whether or not to enable the FRONT
AUDIO LEVEL control for the signal selected
as the input signal to AUDIO CH1.
FRONT: Only enabled when FRONT is
selected.
W.L.: Only enabled when WIRELESS is
selected.
REAR:Only enabled when REAR is
selected.
ALL: Enabled for any input selected.
OFF: Disabled for any input selected.
Recording level does not change by
turning the volume control.
– C U F –
FRONT VR CH2 FRONT
W.L.
REAR
ALL
OFF
Select whether or not to enable the FRONT
AUDIO LEVEL control for the signal selected
as an input signal to AUDIO CH2.
FRONT: Only enabled when FRONT is
selected.
W.L.: Only enabled when WIRELESS is
selected.
REAR:Only enabled when REAR is
selected.
ALL: Enabled for any input selected.
OFF: Disabled for any input selected.
Recording level does not change by
turning the volume control.
– C U F –
MIC LOWCUT
CH1
FRONT
REAR
W.L.
OFF
Select the microphone low-cut filter.
– C U F –
MIC LOWCUT
CH2
FRONT
REAR
W.L.
OFF
Select the microphone low-cut filter.
– C U F –
MIC LOWCUT
CH3
FRONT
REAR
W.L.
OFF
Select the microphone low-cut filter.
– C U F –
MIC LOWCUT
CH4
FRONT
REAR
W.L.
OFF
Select the microphone low-cut filter.
– C U F –
LIMITER CH1
ON
OFF
Select the limiter.
– C U F –
LIMITER CH2
ON
OFF
Select the limiter.
– C U F –
AUTO LEVEL
CH3
ON
OFF
Select the level setting method.
– C U F –
AUTO LEVEL
CH4
ON
OFF
Select the level setting method.
– C U F –
REC
CH3/CH4
SW
CH1/2
Select the signals to be recorded in CH3
and CH4.
SW:
According to camera’s CH3 and CH4
selector switches.
CH1/2: Record same signals as CH1 and
CH2.
– C U F –
25M REC CH
SEL
2CH
4CH
Select the audio channels to be recorded in
the DVCPRO and DV formats.
2CH: Only recorded in CH1 and CH2.
4CH: Recorded in all channels from CH1
to CH4.
– C U F –
Items/
Data Saved
Adjustable
Range
Remarks
TEST TONE
NORMAL
ALWAYS
OFF
CHSEL
Select the test signal.
NORMAL: Output test tones to CH1/2 when
the OUTPUT/AUTO KNEE
selector switch is set to BARS and
the AUDIO IN switch CH1 is set to
FRONT.
ALWAYS: Output test tones to CH1/2 when
OUTPU/AUTO KNEE selector
switch is set to BARS.
OFF:
Disable test tone output.
CHSEL:
Output test tone to the channels
where the AUDIO IN switch CH1
or CH2 is set to FRONT when
OUTPUT/AUTO KNEE selector
switch is set to BARS. The test
tone is not output to CH3 and
CH4.
– C U F –
Items/
Data Saved
Adjustable
Range
Remarks
FRONT MIC
POWER
ON
OFF
Select the phantom power supply for the
front microphone.
– C U F –
REAR MIC
POWER
ON
OFF
Select the phantom power supply for the
rear microphone.
– C U F –
AUDIO OUT
ON
OFF
Set the audio output circuit.
OFF: Power-down output circuit to disable
output.
ON:
Enable output.
– C U F –
MONITOR
SELECT
STEREO
MIX
Select the signal format for the monitor
output.
– C U F –
FRONT MIC
LEVEL
–40dB
–50dB
Select the front microphone input level.
– C U F –
REAR MIC CH1
LVL
–50dB
–60dB
Select the rear microphone input level.
– C U F –
REAR MIC CH2
LVL
–50dB
–60dB
Select the rear microphone input level.
– C U F –
REAR LINE IN
LVL
0dB
+4dB
Select the rear line input level.
– C U F –
AUDIO OUT LVL 0dB
+4dB
Select the audio output level.
– C U F –
HEADROOM
18dB
20dB
Set the headroom (standard level).
– C U F –
WIRELESS
WARN
ON
OFF
Select whether or not to enable the alarm to
trigger for poor wireless receiver reception.
– C U F –