Panasonic SPX900 - Manual (Page 61)

61
4
4-10-4 How to Use Scene File Data
It is possible to write the settings data into the scene file area of
the internal memory of the AJ-SPX900E, or to read data written
in this area. Four types of scene files are available. This data
allows you to quickly reproduce an optimum setup state.
TITLEs 1 - 3 are factory-assigned the defaults for the AJ-
SPX900E; TITLE 4 is assigned the parameter for FILMLIKE.
The setting for TITLE 4 can be changed.
To change the settings, go to the <SCENE> screen from the
FILE page.
To write settings data for scene files:
1
Navigate the menu to the SCENE screen.
2
Turn the JOG dial button to move the cursor to the SCENE
SEL option.
3
Press the JOG dial button to blink scene file numbers.
Then, turn the dial button to select a desired scene file
number.
4
Press the JOG dial button to accept the scene file.
5
Turn the JOG dial button to return the cursor to the option
WRITE.
6
Press the JOG dial button to display the following message:
7
Turn the JOG dial button to move the cursor to YES. Then,
press the dial button.
This writes the setting data into the scene file area of the
AJ-SPX900E internal memory.
8
To exit the menu, press the MENU button.
6&(1(!
5($'86(5'$7$
 6&(1(6(/ 
5($'
:5,7(
5(6(7
7,7/( 
7,7/( 
7,7/( 
7,7/( 
6&(1(!
5($'86(5'$7$
6&(1(6(/ 
5($'
 :5,7(
5(6(7
7,7/( 
7,7/( 
7,7/( 
7,7/( 
:5,7("
<(6
 12
7,7/(