Panasonic SPX900 - Manual (Page 80)

80
6-7 Voice Memo
A voice memo is audio data that can be attached to the clip
separately from the voice recorded during shooting.
<Note>
A voice memo can be attached during recording. Please refer to
[3-8 Voice Memo Function] for more information.
6-7-1 Playing Back Voice Memos
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the MENU BAR button. The pointer moves to the
menu bar.
3
From the MENU BAR, select THUMBNAIL  VOICE
MEMO CLIPS.
The clip thumbnails with voice memos attached are
displayed in the upper section of the LCD monitor. The
lower section of the LCD monitor shows information about
the voice memo on the clip selected by the pointer.
4
Move the pointer over the clip that contains the desired
voice memo to playback and press the SET button.
The pointer moves to the lower part of the LCD monitor.
5
Press the left/right cursor buttons ( ) to move the pointer
over the still image that is related to the voice memo you
wish to play back. Then, press the SET button.
6
The voice memo will be played back.
During voice memo playback, the still image related to the
voice memo is displayed on the LCD monitor and the
viewfinder. The video output signal is also the still image.
To stop the voice memo playback, press the STOP button.
7
To return the pointer to the thumbnail display after playback
of a voice memo, press the MENU BAR button to move the
pointer to the menu bar, and then select EXIT.
<Note>
The voice memo playback signal is emitted through the
speaker and the PHONES jack on the camera. This signal
is not emitted from the AUDIO OUT jack.
6-7-2 Recording a Voice Memo
During thumbnail display, voice memos can be added to the clip
on which the pointer is positioned.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Use the cursor buttons to move the pointer over the clip to
which you want to attach a voice memo.
3
Press the Voice Memo button and record the voice memo
through the Voice Memo Microphone.
“VOICE REC” is displayed at the top of the screen.
<Notes>
z When a voice memo is attached during thumbnail display,
the voice memo is related to the first still image of the clip.
Please refer to [3-8 Voice Memo Function] for more
information.
z When the power is abruptly turned off while a voice
memo is being recorded during playback of a clip, the clip
will not be affected by this, but the voice memo will not be
recorded.
4
Press the Voice Memo button or the stop button again to
stop recording.
Shows the still image that
the voice memo is related to.
Thumbnail
Display
Shows the total number of voice
memos attached to the clip.
The pointer moves down.
Voice Memo
Microphone
Voice Memo Button