Panasonic SPX900 - Manual (Page 91)

91
8
Chapter 8 Menu Description Tables
8-1 Menu Configuration
About Menu Description Tables
USER MENU
USER MENU SELECT
SYSTEM SETTING
PAINT
CAM OPERATION
SYSTEM MODE
OPTION MODE
REC FUNCTION
OUTPUT SEL
GENLOCK
ROP
LOW SETTING
MID SETTING
CAMERA ID
SHUTTER SPEED
SHUTTER SELECT
USER SW
SW MODE
WHITE BALANCE MODE
IRIS
FLARE
USER SW GAIN
MATRIX
COLOR CORRECTION
SYSTEM SETTING(USER)
PAINT(USER)
VF(USER)
CAM OPE(USER)
FILE(USER)
MAINTENANCE(USER)
MAIN OPE(USER)
SKIN TONE DTL
KNEE/LEVEL
HIGH SETTING
ADDITIONAL DTL
GAMMA
CAMERA SETTING
VF VF DISPLAY
VF MARKER
USER BOX
VF INDICATOR1
VF INDICATOR2
MODE CHECK IND
FILE SD CARD READ/WRITE
SD CARD R/W SELECT
LENS FILE
SCENE
INITIALIZE
MAINTENANCE SYSTEM CHECK
LENS ADJ
BLACK SHADING
WHITE SHADING
MENU
MAIN MENU
OPTION MENU
OPTION
! LED
MAIN OPERATION
BATTERY SETTING2
MIC/AUDIO 1
BATTERY/P2CARD
BATTERY SETTING1
UMID SET/INFO
MIC/AUDIO 2
TC/UB
LCD MONITOR
DIAGNOSTIC1
DIAGNOSTIC2
HOURS METER
Opening the Menus
USER MENU:
Displayed when the MENU button is
pressed.
MAIN MENU:
Displayed when the MENU button is
pressed for at least 3 seconds.
OPTION MENU:
Displayed when the MENU button is
pressed while pressing the LIGHT button.
<Notes>
z The following items can be set: 42 camera-related items (14 C 3 pages), 14 recording-related items (1 page).
z The items highlighted in grey cannot be selected by <USER MENU SELECT>.
z The underlined items can only be selected as one whole page (with all sub-items). Individual sub-items cannot be selected
separately.
The following letters indicate whether the modified menu data is saved to
or read out from the memory.
The
– indicates that the data cannot be saved or read.
S = Can be saved and read as scene data file.
C = Can be saved or read using CARD READ/WRITESD.
U = Can be saved and read as user data.
Please refer to [8-7-4 SCENE] and [8-7-5 INITIALISE].
F = Can be read using READ FACTORY DATA.
Please refer to [8-7-5 INITIALISE].
E = Can be saved using ECU DATA SAVE.
Please refer to [5-8 Connecting the AJ-EC3E Extension
Controller].
Items/
Data Saved
Adjustabl
e Range
Remarks
REC SIGNAL CAM
VIDEO
1394 Select video input signals.
CAM
Record the signal from the camera
VIDEO: Record the signal from the GENLOCK
IN terminal
1394: Record the signal from the 1394 input
terminal. (When the optional unit is
attached.)
– C U F E
This section shows the
adjustable range of the
set value, and available
options for this item. About the settings available for this
item.