Avaya P460 - Manual (Page 24)

Chapter 3 Avaya P460 Chassis and Module Installation
10 Avaya P460 Installation and Maintenance Guide
Cable Guide Installation
You can use the cable guide to tidy cables from the Supervisor and I/O modules.
The cable guide is symmetric: you can install the bracket on either side of the switch.
L Avaya recommends that you install the cable guide on the left side of the switch
to allow easier access to the fan module.
L You need to install the rack mounting brackets before you can install the cable
guides.
L Install the switch in the rack before installing the cable guide.
•
Secure the cable guide to the rack mounting bracket using the captive screws on
the cable holder (see Figure 3.5).
Figure 3.5 Installing the Cable Guide
Key
a Cable Guide
b Rack-mounting bracket
a b a b
Left side of chassis Right side of chassis