Chicago Electric 40388 - Manual (Page 4)

Page 4- SKU: 40388
Safety Warnings and precautions for Arc Welding
WArning! Arc Welding can be Hazardous.
it is your responsibility to operate this equipment in a safe manner.
Fire or explosion precautions
Arc welding creates heat and sparks. These can cause fire or explosion. Please follow
these safety considerations while using your spot welder.
Be aware of flying sparks. Only weld in an area that does not contain any materials
which can be ignited by flying sparks. Extinguish any significant flying sparks before
continuing to weld.
Protect yourself and others around you from burns which can be caused by flying
sparks.
Never weld in an area which contains materials which can be ignited by flying
sparks.
Be sure that you have a fire extinguisher nearby before using this welder.
Never weld enclosed containers. Sparks in an enclosed container can trigger an
explosion.
Never weld in an atmosphere which might contain flammable fumes.
Periodically during welding, and after completion of job, inspect your area for any
ignition that might have been caused by flying sparks.
electric Shock Hazard precautions
Be aware that your arc welder operates through high resistance electrical current. Exposure
to this current can cause injury or death. Please use safety precautions against electrical
shock while using your welder.
Always unplug your welder prior to making any adjustments or repairs.
Never leave your welder unattended while plugged in.
Never use your welder in a wet environment, or while you are wet or on a wet sur-
face.
Always wear electrical insulating clothing, gloves and shoes while using your welder.
Never use an extension cord which is not properly approved and rated for this equip-
ment.
Assure that you are drawing from an electrical supply which is protected by a 30
Amp fuse or breaker switch.
1.
.
3.
4.
5.
6.
7.
1.
.
3.
4.
5.
6.
reV 07i