Surround sound, Place the speakers so the, Variable audio output – Philips 8P4841C199 User Manual
Page 27: Variable audio output control, Ound, Ontrols, Continued
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S
ound
M
enu
C
ontrols
(
continued
)
SURROUND SOUND
'ny adding optional external
AJ speakers to the TV's sound
system, you can create the feeling
of reflected sound that surrounds
you at a movie theater or concert
hall.
,---------- -
C
BEGIN]
Connect both external
speakers to the speaker wire
terminals on the TV.
Recommended speakers: 8ohm, 15
watt minimum. Be sure the (+) and
(-) speaker wires are connected to
the correct R(ight) and L(eft)
speaker terminals on the TV.
<l>
Place the speakers so the
viewing area is between the TV
and the rear surround speakers.
(See overhead view drawing.)
<|> Turn TV ON and place the
STEREO control to the "STEREO
IF AVAILABLE" position.
After setup whenever a stereo
signal is received the audio will be
heard in Surround Sound.
ft
VARIABLE AUDIO OUTPUT
7
'^he TV’s Variable Audio Output
jacks can also be used for
Surround Sound. Once they are
connected to an external hi-fi
system its speakers can be used for
the playback of Surround Sound.
L
begin
J
Connect the R(ight) and L(eft)
VARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
<l>
Turn TV ON and place the
VARIABLE AUDIO OUTPUT on
screen control to the SURROUND
(
a
>) position. (Sound Menu 3 of 3).
NoteiThis will change the
Left/Right channel audio line level
signal at the Audio Output jacks to
the same signal found at the TV's
Surround Sound Speaker terminals.
REAR
surround
SOUND
SPEAKER TERMINALS
1
Remember,
Surround Sound
will not work with
only one speaker
connected; or with
monaural audio
material (unless
Stereo Surround
control is turned
ON - see Variable
Audio section
below).
Note: The rear Surround Sound speakers will not
be heard at the same volume level as the front TV
speakers. It is intended for the rear speakers to give
a background noise effect which requires a lower
volume level than the TV's front speakers.
REAR SPEAKER
REAR SPEAKER
PRIMARY VIEWING AREA
VARIABLE AUDIO
OUTPUT JACKS
AUDIO SYSTEM SPEAKERS USED AS REAR
SURROUND SOUND SPEAKERS
27