Philips HD2528C - Manual (Page 3)

How
TO U se and S etup our TV for the F irst T ime
rC
T elevision ~T begin T~
r<i>P
Press the POWER
button to turn the TV ON.
<l>
Press the VOLUME UP
(A) or DOWN (T) button to
adjust the sound level.
<l>
Press the CHANNEL UP
(A) or DOWN (T) button to
select TV channels.
Press the MENU UP (A) or
DOWN (V) button to display
the TV’s on-screen menu. Then
press the M ENU UP (A) or
DOW N (T) button to scroll
through the list of on-screen fea­
tures. ------------------ ^
, The SETUP on-screen control is auto­
matically selected when you first plug
in your TV and press the MENU but­
ton (on the TV or remote.)
Remember,
you can press any
button on the front
of the TV to turn the
TV ON.The tuned
channel number will
always briefly
appear when the TV
is first turned ON
(and with channel
changes.) You can
also press the STA­
TUS button (on the
remote) to see what
channel the TV is
ON.
S etup M enu
A ltom ATic S i iTiNiis
F irst Time Setup takes care
of some basic TV control
settings for you. Follow the steps
in this section to quickly add
area channel numbers into the
TV’s memory, set the Language,
the Clock, and the TV for
Antenna or Cable signal.
~[ BEGIN]
-a> Press MENU (M)
button on the remote (or
M ENU A or ▼ buttons on the
TV). A n on-screen list of fea­
tures appears on the TV screen.
lan ( íu aí ; k
W ith the I .angttagi^ to<tmrc
sdccted. press the VOL (+)
button to choose Englislt,
to auiotikttieiilly dctemihie if
cable channels aic pmscnt.
-TV set tore.eeivcCableTV
TV seno № cetvc Antenjvt
M ipplieti dwnnds
^UJG PROGRAMMING
'D PROGRAM CHANNELS
EXIT EXIT
Fussing the VOL (+) button
with the Exit fcatum seleeictl
will iUttihi you to titer
<l>
Press the CH (-i-) or (-)
buttons on the remote (or the
M ENU A or V buttons on the
TV) to select the SETUP feature
with the on-screen arrow.
<$>
<l>,
AlitO
PROGRAM M ING
W ith the A «to Programming
feature sdected, press tite V OL
(+) button to automatically
fiore ati avdlaW c cliatmels into
the TV‘5i m emory.
Press the VOL (+) button to
access the SETUP on-screen
menu. Then, press the CH (- e )
or (-) buttons to scroll the
SETUP options. Next press the
VOL (+) or (-) buttons as direct­
ed to use the selected menu items.
Press the STATUS/EXIT
button on the remote to clear
the screen after an adjustment
or scroll to the “EXIT” option
in the SETUP screen and press
the VOL (+) button to bring
you back to the main on-screen
menu.
You can also just wait and after
a m inute the M ENU will drop
automatically from the screen.
Press the S
remote’s STATUS
button (or use
“EXIT”) to back out
of the SETUP menu.
Remember, SETUP
is a first-use, one­
time operation and
will not have to be
repeated (even if the
TV is unplugged.)
(Ereneh) fivr the TV on-screen
menu conirels.
AUTO CABLE SELECT
W ith Auto Cable Select cho-
R emote
-Í beqin I-
'T^o load the supplied batter-
X ies into the remote:
1. Remove the battery com­
partment lid on the back of
the remote.
2. Place the batteries (2-
AAA) in the remote. Be
sure the (+) and (-) ends of
the batteries line up correct­
ly (inside of case is
marked.)
3. Reattach the battery lid.
<S>F
Point the remote
control toward the remote
sensor window on the TV
when operating the TV with
the remote. ----- ^
Battery Compartment
Channel Scan BwttQn
Press to scan up or down through
channel numbers. (Also can be
used with the MENU button to
select on-screen controls. With the
Menu displayed, press Channel
A
or ▼ buttons to move up or down
the list of controls.)
Slaius/Eat B»U9n
Press to see the current channel
number on the TV screen. Also
press this button to clear the TV
screen after control adjustments.
M enu Buttons ---------------------------------- 1
Press the M button to show on­
screen controls. Press Channel (-t-)
or (-) buttons to move through the
list of controls. Press the Volume
(-!•) or (-) buttons to adjust the
MENU controls.
M ute Button -
Press to turn the sound OFF on the
TV. Press again to return the sound
to its previous level.
CC Button -
Press to select the Qosed Captioning
mode. (CC w MUTE, CAPTION 1,
CAPTION 2, or OFF)
^ O
O b b
Power Button
Press to turn TV ON and
OFF.
■ Volume (-) aqd (t)
Buttons
Press to adjust the TV
sound level. When used
with the MENU button,
press to adjust the selected
on-screen (MENU) feature
controls.
- A/CH Button
Press to toggle between cur­
rent and previously viewed
channel.
Mtfmfepr Putiops
Press two number buttons
to select TV channels. For
example: to select channel
6... press "0" first; then "6".
Sleep Button
Press to set the TV to auto­
matically turn itself OFF.
Sepage (5) for details.