Philips 7P6051C - Manual (Page 2)

How то U se F irst T ime S etup
Л11ГОМАГ1С Si; i l INCS
"rpirst Time Setup automati-
JL cally takes care of some
basic TV control settings for
you. Follow the steps in this
section to quickly add area
channel numbers into the
TV's memory, and set the TV
for your connected signal
(Antenna or Cable.) You can
also set the TV's Smart Clock
feature as well.
Press the MENU (M)
button on the remote or TV.
An on-screen list of TV fea­
tures shows on the screen -
"MAIN MENU".
<l>c
Select "1ST TIME
SETUP" on the TV's Main
Menu. (Selected MENU item
is highlighted in RED.)
Press the remote's Menu^
buttons to move UP/DOWN
and from SIDE-TO-SIDE
within the list of on-screen
features.
Press ADV(ance) ▲ ▼ and
(+) (-) on the TV to move
UP/DOWN and from SIDE-
TO-SIDE within the list of
on-screen features.
<S>i
Press MENU (M) but­
ton on the remote or TV to
begin SETUP.
Follow the instructions
shown on the TV screen to
guide you through the First
Time Setup and use of your
new TV.
-------------------------------
Many of the current TV
control settings will be
modified by continuing
with RrsMime Setup.
Press STATUS to Quit
or
Press "M" to Continue
Press "AT” to select the
This TV is equipped with
the SMART CLOCK feature.
language you would like
the TV displays to use. This feature is designed
-► 1 ENGLISH 1
to operate only on the
main antenna. ANT A.
espa O ol
FRANÇAIS
Press ’M“ to Continue Press "M" to Continue
* Please Wait *
* Please Wait * The search for active
^ System is testing for
System is searching for
channels Is complete
fnrAMTA
correct tuning mode
for ANT A.
^ all active channels
on ANT A. 17 channels were found
1
Testing channel 2
in cable mode.
and saved in memory
Press ’M" to Continue
Please check that your
other antenna or cable is
connected to the plug
marked ANT B on
the TV rear input panel.
Press STATUS to Quit
or
Press "M" to Continue
* Please Wait *
System is testing for
correct tuning mode
for ANT B.
1
* Please Wait *
System is searching for
all active channels
on ANT B.
Testing channel 2
in cable mode.
The search for active
channels is complete
for ANT B.
17 channels were found
and saved in memory
Press “M" to Continue
This TV contains a clock
which can automatically
be set through the
aviART CLOCK feature.
The clock will be set
to the time broadcast
by certain TV stations.
Press 'M' to Continue
This TV is equipped with
a Surround-Sound system.
Surround Sound requires
the use of additional
speakers being placed
around your room.
Press "M" to Continue
Please thoroughly read
the section in your
owners manuel which
details the proper setup
and operation of the
Surround-Sound System.
Press "M" to Continue
If there is RED or BLUE
fringe on the WHfTE cross,
use this adjustment to
improve the picture.
Press "M" to Continue
- o r -
Press "k" to Return
This completes the
First-Time Setup.
Press "M" to Exit Setup
S mart Н елл »
Remember, SETUP is a first -use,
one-time operation and will not
i have to be repeated (only the clock set­
tings can be lost).
• Press the STATUS button on the remote or
TV to stop the SETUP at any time.
• Even if there is no Antenna or Cable signal
connected to the ANT(enna) B input (located
on the rear of the TV), 1st Time Setup will
still attempt to add channels into memoiy for
that source. In such cases, a channel search
in the Antenna Mode will be completed, and
“0 channels saved in memory” will be dis­
played on-screen.
• When setting the Smart Clock (Set Time
Automatically), enter your local PBS channel
number when it is requested on-screen.
• When setting the Time Manually use the
remote's number (or Menu AV) buttons to
enter the time for the TV's clock. Press "0"
with single digit hour entries when using the
number buttons on the remote.
2 - EL6239 E001