Philips 7P6031C - Manual (Page 33)

A Tow that you have looked up
1 V
the two-digit Remote Code
Number for your brand of Cable
Converter (on previous page),
you are ready to follow the four
simple steps below.
Please read through steps 1-4
before beginning.
( BEGIN j
Press and release the REC
j (RECORD) button.
Within thirty seconds after
releasing the REC button, press
and release the CBL System
button.
Within thirty seconds after
releasing the CBL System but­
ton, ENTER THE TWO
DIGIT CODE NUMBER for
the desired Converter. The
remote is now ready to send
commands to the Converter.
Point the remote at the
Converter. Press the POWER
button on the remote to turn the
Converter ON.
S
mart
H
fxp
Try it out. The Channel
land POWER buttons on the
remote should now operate the
Converter.
Remember, if this doesn’t work
the first time, repeat steps using
the same remote code number.
If after a second try the remote
does not operate your Converter,
and there are more code numbers
listed for your brand Converter,
use the next listed code number.
If after repeated attempts the code
number method does not work
your Converter, try the "CON­
VERTER SEARCH" method on
page 34.
№ №
Cable Converter
S' M ® iV
r*USH 1
SURF)
Pi
PI
va CH
o
33 - IB7893 E001