Cub Cadet 450 - Manual (Page 9)

9
4
Know Your
Tiller
WARNING
Clutch Control
The clutch control is located beneath the handle.
Squeezing the clutch control against the handle engages
the wheel and tine drive mechanisms.
NOTE: Never engage clutch lever while shifting.
Handle Adjustment Lock
The handle may be adjusted to the height desired.
Loosen the handle height adjustment lock a few turns.
Pivot handle up or down to desired position. Tighten lock.
Throttle Control
The throttle control lever is located on the engine. It
controls the engine speed and stops the engine.
Choke Lever (If Equipped)
The choke lever is located by the throttle. It is used to
enrich the fuel mixture in the carburetor when starting a
cold engine.
Primer Button (If Equipped)
The primer button is located behind the air cleaner. It is
used to enrich the fuel mixture in the carburetor when
starting a cold engine.
Depth Stake
The depth stake controls the tilling depth. Refer to
‘‘Setting the Depth’’ in the Operating Section.
Engine Controls
See the separate engine manual for additional informa-
tion and functions of the engine controls.
This symbol points
out important safety
instructions which, if
not followed, could
endanger the personal
safety and/or property
of yourself and others.
Read and follow all
instructions in this man-
ual before attempting to
operate this machine.
Failure to comply with
these instructions may
result in personal injury.
When you see this
symbol,
HEED ITS WARNING!