Clarion S100 - Manual (Page 25)

22
➤ Full trigger response 30 or 60 seconds: This determines how
long the full triggered sequence lasts. Some states have laws
regulating how long a security system can sound before it is
considered a nuisance. If your installer is programming the
security system with the Pro Security Programmer, the full
triggered response can be programmed for any duration
ranging from 1 to 180 seconds.
➤ False alarm prevention Circuitry on or off: Please refer to the
false alarm prevention circuitry section of this manual for a
further explanation. If the false alarm prevention circuitry is
programmed off, the security system will respond to inputs
from any sensor indefinitely.
➤ Progressive door trigger on or off: When the system is armed
and a door is opened, the system responds with ten chirps prior
to beginning the full triggered sequence. If an instant trigger is
desired, the progressive door trigger can be programmed off.
➤ Override pulse count: The number of presses of the Override
switch required to disarm the security system, AED, or the
Anti-Carjacking system can be programmed from one to five
presses. The default setting is one press.
➤ Siren tones and chirp volume: The output of the siren consists
nnoottee:: Because many states have laws regulating security sys-
tems, programming false alarm prevention circuitry off may
cause your system to violate state laws.
nnoottee:: This feature will only function if the Starter Kill relay has
been installed.