Casio ID-16 User Manual
Operation guide id-16
Operation Guide ID-16
1
MA0505-EA
•
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
•
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Current time
(Hour, minutes, seconds)
Day of the week
Current temperature
Current humidity
Date (month - day)
PM indicator
1cm
ILLUSTRATION
GENERAL GUIDE
1
1
1
1
1 + / – buttons
Use these buttons to change the setting that is flashing on the display.
2
2
2
2
2
°
C/
°
F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
3
3
3
3
3 SET button
Use this button when setting the current time.
4
4
4
4
4 RESET button
Press this button to reset the clock after replacing its batteries.
USING THE CLOCK
1. Press the
SET
button (
3
) to cycle through the setting screens as shown below.
12-hour/24-hour
Timekeeping Screen
Time Setting Screen
Month and Day
Setting Screen
Year Setting Screen
Normal Timekeeping Screen
2. While the screen you want is displayed, use the
+
and
–
buttons (
1
) to change the flashing digits.
•
Holding down
+
or
–
changes the flashing digits at
high speed.
•
You can set the year in the range of 2000 to 2039.
The day of the week is set automatically in
accordance with the date setting.
•
Pressing
+
or
–
while the Time Setting Screen is
on the display causes the seconds count to be
reset to 00.
•
Each press of
+
or
–
while the 12-hour/24-hour
Timekeeping Screen is on the display toggles
between 12-hour and 24-hour timekeeping.
3. After making the settings you want, use the
SET
button (
3
) to display the Normal Timekeeping Screen.
•
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
THERMOMETER FUNCTIONS
•
A built-in sensor measures temperature and shows the measured value on the display.
•
The temperature display shows “LO” for temperatures below –50
°
C (–58
°
F) and “HI” for temperatures above
70
°
C (158
°
F).
•
Though temperature readings are displayed up to 0
°
C (32
°
F) and greater than 41
°
C (105
°
F), note that such
readings are actually outside the guaranteed temperature range of this clock.
Switching between Celsius and Fahrenheit
•
Push the
°
C/
°
F
button (
2
) to select either Celsius (
°
C) or Fahrenheit (
°
F).
°C/°F
button (
2
)
°
C
°
F
Celsius (
°C)
Fahrenheit (
°F)
Press
–
to
decrease
the flashing
digits.
Press
+
to
increase
the flashing
digits.