Turbo timer mode – CLIFFORD Security System 510.4X User Manual

Page 27

Advertising
background image

24

© 2010 Directed Electronics. All rights reserved.

button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command.

4. The parking lights flash 5 times to confirm MTS mode is enabled

and the remote start activates the ignition outputs.

5. Turn Off and remove the key from the ignition switch, the engine

remains running.

6. Exit the vehicle, close all the doors and arm the system.
7. The engine turns off. If the door is opened in Step 1 then the

engine continues to run.

Turbo Timer Mode

The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
1. With the engine running, set the parking brake.
2. Press the optional dash mounted activation button or perform the

Timer Mode command.

3. The parking lights turn on and the remote start activates the igni-

tion outputs.

4. Turn Off and remove the key from the ignition switch, the engine

remains running.

5. Exit the vehicle, close all the doors and arm the system.
6. The engine runs for the Turbo Mode runtime.

Note

Turbo Timer must be turned on by an authorized Directed
dealer.

Advertising