Canon Trimmer - Manual (Page 16)

Operation While Trimming 2-3
Operation While Trimming
When the conveyor is full of booklets, remove the booklets.
If the machine stops because the conveyor is full, remove the booklets, and operation
restarts automatically.
· If you remove booklets before the conveyor is full, you can increase production
efficiency without interrupting operation.
· Be careful not to drop a booklet while removing it.
When the trim box is full, empty it.
If the machine stops because the trim box is full, and trim stacks up between the sensor
and the reflector, remove trim, and operation will restart automatically.
· If you remove trim before the trim box is full, you can increase production effi-
ciency without interrupting operation.
Delivery Tray
Trim Full
Sensor
Trim Box