HTC One M9 - Manual (Page 178)

Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on HTC One M9, and
then turning on the headset.
However, you might have to connect manually if your headset has been used with another Bluetooth
device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 177.
2. Tap the headset’s name in the Paired Devices section.
3. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to
find the passcode.
If you still cannot reconnect to the headset, follow the instructions in Unpairing from a Bluetooth
device on page 178, and then follow the steps under Connecting a Bluetooth headset on page 177.
Unpairing from a Bluetooth device
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 177.
2. In the Paired devices section, tap next to the device to unpair.
3. Tap Unpair.
Receiving files using Bluetooth
HTC One M9 lets you receive various files with Bluetooth, including photos, music tracks, contact
info, calendar events, and documents such as PDFs.
Refer to the device’s documentation for instructions on sending information over Bluetooth.
1. Turn Bluetooth on.
See Turning Bluetooth on or off on page 177.
2. On the sending device, send one or more files to HTC One M9.
3. If asked, accept the pairing request on HTC One M9 and on the sending device. You may also
be prompted to enter the same passcode or confirm the auto-generated passcode on both
devices.
You'll then get a Bluetooth authorization request.
4. Tap Pair.
5. When HTC One M9 receives a file transfer request notification, slide the Notifications panel
down, tap the incoming file notification, and then tap Accept.
178 Wireless sharing