HTC Butterfly 2 - Manual (Page 2)

Things to know about waterproof protection
HTC Butterfly 2 meets the IPX7 waterproof standard.
This means that if you accidentally drop this phone
in water, it is protected from water under these
conditions:
• The nano SIM and microSD covers are closed firmly.
(See previous page for details.)
• The phone is immersed in plain tap water within 1
meter deep and for less than 30 minutes.
In addition to the above, take the following
precautions to help protect the phone:
• Avoid immersing the phone or letting the USB
port and headset jack come in contact with
liquid chemicals such as liquid soap or detergent.
Also, never immerse the phone in sea water, the
swimming pool, hot springs, or any liquid besides
water (such as alcohol).
In case the USB port and headset jack have had
contact with salt water or liquid chemicals, rinse
using fresh water. These contaminants may damage
the connector pins.
• If the USB port and headset
jack got wet, hold the phone
with these ports facing up
and shake off the water.
Make sure to let the ports
dry completely before using
the phone.
• Keep the phone away from sand.
See the user guide for more details on waterproof
protection for HTC Butterfly 2.
Sea water Soap/
detergent/
shower gel
Swimming
pool
Hot springs Sand
4
6
5
microSD
gold
contacts
4. Insert your fingertip
in the small opening
on the left side of the
phone, and then pull
the microSD tray out.
5. Make sure the phone
and the microSD tray
are facing up. Place
your microSD card into
the tray, with the gold
contacts facing down.
6. To reinsert the microSD
tray, center it first in the
slot, and then slide it all
the way in.
After sliding the nano SIM and microSD trays into
the slots, slide your finger several times across
the cover that’s attached to the tray, to ensure
that it’s closed evenly and firmly. Make sure the
cover doesn’t protrude from the side.
To prevent water from entering the slots: