HTC Butterfly - Manual (Page 179)

3. Tap Wi-Fi.
Detected Wi ‑Fi networks will be listed.
If the wireless network that you want is not listed, tap > Add network to manually
add it.
4. Tap the Wi ‑Fi network you want to connect to. If you selected a secured
network, you'll be asked to enter the network key or password.
5. Tap Connect. You'll see the Wi ‑Fi icon in the status bar when connected.
The next time HTC Butterfly connects to a previously accessed secured wireless
network, you won’t be asked to enter the key or other security information again.
Connecting to a Wi ‑Fi network via WPS
If you're using a Wi ‑Fi router with Wi‑Fi Protected Setup (WPS), you can connect HTC
Butterfly easily.
1. Slide the Notifications panel open, and then tap .
2. Tap the Wi-Fi On/Off switch to turn Wi ‑Fi on.
3. Tap Wi-Fi.
4. Tap > WPS Push, and then press the WPS button on your Wi ‑Fi router.
To use the Wi ‑Fi Protected Setup (WPS) PIN method, tap > WPS Pin Entry.
Disconnecting from the current wireless network
1. Slide the Notifications panel open, and then tap .
2. Tap Wi-Fi.
3. You can:
§ Tap the wireless network that HTC Butterfly is connected to, and then tap
Disconnect.
§ If you want to remove the settings for this network, press and hold the
network name, and then tap Forget network.
Connecting to a different Wi ‑Fi network
1. Slide the Notifications panel open, and then tap .
2. Tap Wi-Fi. Detected Wi ‑Fi networks are displayed.
To manually scan for available Wi ‑Fi networks, tap > Scan.
3. Tap a Wi ‑Fi network to connect to it.
179 Internet connections