Vertical Communications R DSU - Manual (Page 42)

•
To store personal speed dial numbers,
1. Press INTERCOM and dial ✳ ✳ 2.
2. Dial memory location (1–0).
3. Press line button, or dial 1, 2, 3, or 4 to select line groups 1–4
—OR—
dial 0 for system to select line.
4. Dial number to be stored (16 digits maximum). Press TAP to store
hookflash and press HOLD to store pause (if needed).
5. Press TRANSFER/CONFERENCE, dial next location, select
line, and dial another number to be stored.
6. Repeat previous step until finished, then press SPEAKER.
• To store special purpose feature buttons,
1. Press INTERCOM and dial ✳ ✳ 1.
2. Press programmable button.
3. Dial feature code:
5 = response messaging button (then dial 0–9 for message)
6 = transfer to voice mail button (then dial extension number)
7 = assist button (then dial 0-9 or * for message)
8 = subdued off-hook voice announce button
98 = group listen button
# = auto redial button
4. Press TRANSFER/CONFERENCE then next programmable
button and dial another feature code.
5. Repeat step 5 until finished, then press SPEAKER.
NOTE: The Federal Communications Commission (FCC) requires that
when programming emergency numbers and making test calls
to emergency numbers you do the following: (1) Remain on the
line and briefly explain to the dispatcher the reason for the
call; (2) always make such a test call during the off-peak
hours, such as early morning or late evening.
Programming Your Telephone GCA70–248
9 – 2 Non-LCD Station User's Guide