Samsung Galaxy Note Edge - Manual (Page 130)

121
Bluetooth Settings
Pair Bluetooth Devices
The Bluetooth pairing process allows you to establish
trusted connections between your device and another
Bluetooth device.
Pairing between two Bluetooth devices is a one-time
process. Once a pairing is created, the devices will
continue to recognize their partnership and exchange
information without having to re-enter a passcode.
1. From a Home screen, tap Apps > Settings.
2. Tap Bluetooth, and then tap the ON/OFF switch to
turn on Bluetooth.
3. Make sure that the target device is discoverable, so
that your device can find it. Refer to the instructions
that came with the device to find out how to set it to
discoverable mode.
4. Tap Scan. Your device will start to scan for
Bluetooth devices within range.
5. When you see the name of the target device
displayed in the Bluetooth devices section, tap the
name. Your device then automatically tries to pair
with the target device. If automatic pairing fails,
enter the passcode supplied with the target device.
Note: Due to different specifications and features
of other Bluetooth-compatible devices, display and
operations may be different, and functions such as
transfer or exchange may not be possible with all
Bluetooth compatible devices.
Delete a Paired Device (Unpairing)
When you unpair from a Bluetooth device, the two
devices will no longer recognize each other. To
connect again, you’d need to pair the devices.
1. From a Home screen, tap Apps > Settings >
Bluetooth.
2. Tap next to the previously paired device, and
then tap Unpair to delete the paired device.