Samsung Galaxy Alpha - Manual (Page 158)

Connecting with other devices
158
S Beam
Use this feature to send data, such as videos, images, and documents.
1
Activate the S Beam feature on the receiving device.
2
On the Apps screen, tap Settings → NFC, and then tap the NFC switch to activate it.
Alternatively, open the quick setting panel and tap NFC to activate it.
3
Tap S Beam and tap the S Beam switch to activate it.
4
Select a file and touch the other device’s NFC antenna to your device’s NFC antenna.
5
When Touch to beam appears on the screen, tap your device’s screen to send the file.
• Do not send copyright-protected data via S Beam. Doing so may violate copyright
laws. Samsung is not responsible for any liabilities caused by the illegal use of
copyrighted data.
• If both devices try to send data simultaneously, the file transfer may fail.