Turning the camera on and off – Casio EX-Z110 User Manual

Page 46

Advertising
background image

GETTING READY

46

AC Adaptor Precautions

• Be sure to turn off power before connecting or

disconnecting the AC adaptor.

• Always turn camera power off before disconnecting the

AC adaptor, even if the camera has batteries installed. If
you don’t, the camera will turn off automatically when you
disconnect the AC adaptor. You also run the risk of
damaging the camera whenever you disconnect the AC
adaptor without first turning power off.

• The AC adaptor may become warm to touch after

extended periods of use. This is normal and is not cause
for alarm.

• After using the camera, turn it off and unplug the AC

adaptor from the AC outlet.

• The camera automatically switches over to AC adaptor

powered operation whenever the AC adaptor is plugged
into the camera.

• Always use the AC adaptor to power the camera

whenever it is connected to a computer.

• Never place a blanket or any other cover on the AC

adaptor. Doing so creates the risk of fire.

Turning the Camera On and Off

To turn on the camera

Press the power button, [

] (REC) or [

] (PLAY). The

green operation lamp will light momentarily, and then
power will turn on. The mode the camera enters depends
on which button you pressed to turn it on.

Press this button to turn on the camera:

Power button or [

] (REC)

[

] (PLAY)

To enter this mode at
startup:

REC

PLAY

Power button

Green operation lamp

[

] (REC)

[

] (PLAY)

Advertising