Charging the battery – Verykool i600 User Manual
Page 12
8
Open the metal cap from the Hinge Type Connector. Lay the T-Flash
card with gold contacts facing down on the Connector, and then close it.
Align the card to the arrow sign as showing the picture:
Charging the Battery
Note: Always keep your phone connector and charger dry.
1.
Connect the connector of the travel adapter to the phone.
2.
Plug the travel adapter into a proper AC wall outlet.
3.
When your phone indicates that the battery is fully charged,
please pull the travel adapter out from the I/O socket of the
phone.
Tip: 1. If the battery is totally empty or not enough, it may take a few
minutes before the charging indicator appears on the screen.
2. You can turn on/off, and use the phone while charging.
Warning: Make sure that the standard voltage/power of the place
where you charge the battery matches with the rated voltage/power of
our travel adapter.