Verykool s732 - Manual (Page 11)

improve the signal strength.
In the standby screen, press
and input the numbers
If the fast call function is activated, in standby screen, long press
the number keys 2-9 to dial the number that has been set up
automatically. If fast call has not been set for the number key you
long pressed, the mobile phone will hint you “fast call phone
number not set”.
1.12 Answering a call
If there is a new incoming call when in call progress, the phone will
pop up caller screen (call waiting is activated). When you answer
the new call, the original call will enter holding status. At this time,
you can select Swap to active the original call, and the new call will
enter holding status.
Note:
When you are in call progress, the new call to another SIM
card can’t be dialed in.
If two calls are connected, you can operate as following:
Conference: when making conference call, you can have a talk
separately with designated conference participant. In conference
call mode, all the others can hear your voice.
1.13 Emergency call
If you are in the network coverage area (you can check the network
signal strength at the top of standby screen), even without the SIM
card, you are also able to make an emergency call.
Note:
The emergency call numbers in different countries or regions
are different. Please refer to the local numbers for specific
emergency service numbers.
4 Dialer
Enter dialer, you can input the number and dial out directly, you
also can use the dialer search function to select the specific contact
from the search list after you input some numbers/letters, then dial
out.
6