Verykool R80L - Manual (Page 28)

23
When the function is activated, there will remind the command identifier,
you can set the private command identifier, but it should contain Capital
and Lowercase, Numbers and Symbols, and should not less than 8
characters.
If this function is set, you can send editing order in form of SMS to the
phone that you lost with another phone and the lost one will perform
automatically the instruction, thus reaching effect of remote control.
The order format of the security control is:
Command identifier+order (+phone number)
Use security control order can achieve the function below:
Function
Content of order
( e.g. Command identifier is “123@!abC”;
Receiving number is “13987654321”)
Call divert 123@!abCcall divert to13987654321
Phonebook divert 123@!abCphonebook divert to13987654321
SMS divert 123@!abCsms divert to13987654321
Cancel SMS divert 123@!abCcancel sms divert
Lock 123@!abClock
Format
123@!abCformat
Power off 123@!abCpower off
Privacy protection: entering privacy protection and the password
inputting screen appears, you can enter the security control menu list if
you input the correct password (default password is 0000). Then you
can select Phonebook, Messages, Call history, File manager to setup
the privacy protection. For example: If you have setup the privacy
protection operation of Phonebook, when you enter the Phonebook, the
password inputting screen appears. You should input the correct
password for enter the Phonebook and do the corresponding operation.
SIM1 binding
When you open SIM1 binding, SIM card slot 1 can only use the SIM card
you specify.
SIM2 binding
When you open SIM2 binding, SIM card slot 2 can only use the SIM card
you specify.
5.10.7 Miscellaneous settings
Sound effects: you can set the audio effect for your phone.
Motion life: if the function is on, you can shake the phone to switch the