Charge the battery, Use touch screen – Verykool s354 User Manual

Page 8

Advertising
background image

7

Keep all SIM cards where children cannot reach or touch.

Note: Keep the SIM card chip contacts face downward. Make the
SIM card fits card slot.

Remove Memory Card, SIM Card and Battery

Note: If the phone is turned on, long press Power Key about 3

seconds until it tips phone options and select Power off and
then press OK to turn off the phone. Then, remove the battery,
SIM card and memory card.

Do not plug or remove memory card in boot state, otherwise it
will cause damage to the file system.

Charge the Battery

1.

Before charging, check the battery slot to ensure the battery has
been installed correctly.

2.

Plug one end of the charger into phone.

3.

Connect another end of the charger to the socket.

4.

Start charging. It can be charged whether power on or power
off.

In power on state, when the battery icon on screen start rolling

means it is been charged. When the icon is full and stop rolling
means charge is completed.

In power off state, the battery icon on screen start rolling means

it is been charged. When the icon is full and stop rolling means
charge is completed.
5.

Unplug the charger from the socket.

6.

Disconnect the charger and phone.

Use Touch Screen

Press: Use finger to press the desired option to confirm

selection or start an application.

Long press: Long press the screen in current operation interface,

icon, or input area; you can open the option menu in current

Advertising