Verykool s6001 - Manual (Page 12)

12
Battery in
With the metallic contacts of the battery facing the metallic contacts in
the battery slot, press the battery down until it locks into place.
Charge up
Ensure the battery is inserted in the handset. To charge the battery, plug
in the charger connector at your phone (USB interface) and then plug
the other end into an AC power socket.
The battery symbol indicates the charging status. While charging, the
charge indicators will scroll. When all the scroll bars are steady, the
battery is fully charged. Disconnect the charger from the phone.
Disconnect the charger from the AC power socket.
Note: If the battery is powerless, the battery icon will reappear
after a few minutes of charging.