Caframo 760CA-WBX - Manual (Page 2)

Thank you for purchasing this Sanibel 12 Volt Fan!
Features: Easy to Install Oscillating Action
Adjustable Fan Head Standard Lighter Plug
7 foot (2.13 m) wire
Adhesive strip and bracket with screws included
Operation:
1. To change degree of fan head tilt, simply set to desired position.
2. To make fan oscillate, move lever down to “on” position.
3. To adjust oscillating angle, move oscillating lever to “off” position, pivot head
of fan to new “start” position, move oscillating lever back to “on” position.
Maintenance:
Clean fan with soapy cloth and wipe dry. DO NOT use gasoline, benzene,
thinners or other solvents. Lubrication is not necessary as motor has been
lubricated and sealed at factory.
Read and Save these Instructions
Warning: Do not position too close to any objects that may be drawn into the
blades, and stop the air flow.
Do not use outdoors.
Do not use on wet surfaces or immerse in water. Never allow water to drip into
motor housing.
Do not use if power supply cord becomes frayed or brittle.
Do not use gasoline, thinners or other harsh chemicals to clean fan.
Do not use near fireplaces, furnaces, stoves or high temperature heat.