Keri Systems DoorsNXT Remote Port Change - Manual (Page 10)

DoorsNXT Remote Port Change
Reference Document
Page 10 of 10 P/N: 01509-001 Rev. A
5. Click on “ Start the service.” When the DoorsNXTSvr is started, the Firebird Server is automatically started.
6. Open up each Client and select the Connection Settings tab. After entering the password, change the Server Name to
add the port number.
For example: If the servername was “DoorsNXTServer” it needs to be changed to read “DoorsNXTServer/3051” (or
whatever port number is used). This will tell the client to communicate to the firebird server using port 3051 instead
of the default port of 3050.
3.0 Contact Keri Systems
End of document.
Keri USA Keri UK, Ireland, Europe
2305 Bering Drive
San Jose, CA 95131
Unit 17
Park Farm Industrial Estate
Ermine Street
Buntingford
Herts SG9 9AZ UK
Telephone: (800) 260-5265
(408) 435-8400
Telephone: + 44 (0) 870 444 7234
Fax: (408) 435-7163 Fax:+ 44 (0) 1763 274 106
Web: www.kerisys.com Web:www.kerisystems.co.uk
E-mail: [email protected]
[email protected]
E-mail:[email protected]
[email protected]