1 heating module settings – KERN & SOHN DLT 100-3N User Manual
Page 33
Advertising
DLT_N-BA-e-1421
33
10.1 Heating module settings
Tap <Heater parameters>, see chap.: 10. The available settings will be
displayed.
<Standby-temperature>
Settings:
Off
Switched off
Standby
Temperature
The numeric input window will be
displayed. Enter required
temperature
selectable 35°C – 100°C.
To import press <OK>. The display
returns to the previous screen.
<Start mode>
Settings:
Manual
Measuring will start as soon as you
tap the control button „OK“
Automatic
Measurement will start automatically
after closing the sample chamber
.
<Start delay>
Settings:
Enter the desired time, selectable from 0-30 sec. in the
numeric input window.
To import press <OK>. The display returns to the
previous screen.
Advertising