KERN & SOHN FKTF - Manual (Page 19)

The automatic limit value calculation is active if under MENU / Configu-
ration / Setting control mode / Tolerance the "tolerance" is set to auto-
matically and the verification switch is active. After entering a setpoint
the ohter limits are automatically calculated according to the statutory
FPVO regulation.
On page 3 of the item you will get
insight into the respective daily and
weekly statistics. If desired, these
can be printed.
Caution:
The daily and weekly statistics are
only visible if you have been acti-
vated under MENU / Configuration /
Setting control mode / Statistic.
With "Manual tare" you can enter
the desired automatic tare value.
Generally:
By clicking the "HOME" button you get back to
the start-up screen.
The "back arrow" key allows one page back.
With "CLR" all product data will be deleted.
FKTF-BA-e-1511 19