4 connecting a display unit, 7 operation – KERN & SOHN KXP V20 User Manual

Page 10

Advertising
background image

6.4 Connecting a display unit

Attention
Put the connecting cable to the display unit in a manner that it is protected against
damage.

Description of the connection cable:

terminal

Color

State

EXC+ [IN+]

red

voltage +

SIG + [OUT+]

green

signal +

SIG -[OUT-]

white

signal -

EXC -[IN- ]

black

voltage -

7 Operation


Information about

• Network connection (power is supplied via the connecting cable of the

display unit)

• Initial Commissioning

• Connection of peripheral devices

• Adjustment, linearization and verification (only the complete balance is

verifiable, i.e. weighing bridge in conjunction with a suitable display unit)

and the correct operation you will in the operating instructions included in the scope
of delivery of the display unit.

So a continuous optimal performance is guaranteed:
• Avoid falling load, shock loads and impacts from the side!
• For weighing operation, all objects must be placed

centrically of the weighing bridge and may not hang over
the edges or the ramps.

• Check adjustment at regular intervals.

10

KXP V20_600-3000-IA-e-1410

Advertising