KERN & SOHN MCB 300K100M - Manual (Page 34)

 The balance is able to only store one taring value.
 When the balance is unloaded the saved taring value is
displayed with negative sign.
 To delete the stored tare value, release scales and press
TARE
.
12.3 Hold function (Standstill function)
The balance has an integrated standstill function (mean value calculation). This
allows correct weighing determination of a person although the latter is not keeping
still on the scales.
0
0.0
 Start balance by pressing OFF
ON
Wait for the rest position display .
HOLD

62.5
 Have person sit or stand in the centre of the seating surface
or weighing platform.
 Press
HOLD
A triangle starts to flash in the display, during this time the
balance will record several measuring values and will then
display the calculated average value.
62.5
 By pressing the
HOLD
button several times, the balance
returns to the normal weighing mode.
 Press the
HOLD
button once more to repeat this function as
often as required.
There is no average value calculation in the event of too much
movement.
34 MCB_MPT-BA-e-1418