Canon PC-D340 - Manual (Page 31)

5-2
4 Press Start to begin copying.
Ex:
• If the paper in the cassette or multi-purpose tray runs out during copying, the LCD displays SUPPLY REC.
PAPER . Load paper in the cassette or multi-purpose tray. When paper is loaded, the machine automatically
resumes copying.
• If you load paper while making copies, do not load a different paper size.
• You can reserve the next copy job while the machine is outputting copies. (
→ User’s Guide)
• After the machine finishes copying, the settings will remain. However, if you press Stop/Reset or no
key is pressed for 2 minutes, they will be reset to the default settings (The time until the machine enters
the AUTO CLEAR mode can be specified. (
→ p. 8-4))
• The capacity of the output tray is 50 sheets (80 g/m 2 ) of paper. To prevent paper jams, remove paper
from the output tray before the count reaches 50.
Cancelling the Copy Job
■ While Scanning Documents in the ADF
(Only for the PC-D340/FAX-L400 Models)
1 Press Stop/Reset.
2 Press OK.
• The document that has stopped in the ADF will come out.
■ After Scanning Documents
1 Press Stop/Reset.
2 Press 4 (–) for YES.
CANCEL COPYING?
<YES NO>
STOP KEY PRESSED
PRESS OK KEY
NOTE
SCANNING
COPY NO.
0001