KERO Puffin Sport and Saco - Manual (Page 4)

9. Inflate both air tubes alternately until they
feel hard (about as much as a fit person could do
by mouth).
10. Install the black fabric end caps.
12. Mount the seat.
11. Inflate the seat.
• Make sure the keel is positioned between
the lines in the bottom of the boat skin.
• The
end caps are installed at both ends of
the boat by means of Velcro fasteners.
• The
seat is placed with the metal frame
against cross rib (3A).
•
Secure to the center cross rib (4) with the
two short snap straps at each forward corner.
The Puffin is now complete