Kuzma Stabi M 130105 - Manual (Page 4)

Technical data:
Mass 60 kg
Platter mass 12 kg
Platter material aluminium& acrylic
Bearing type ruby ball- inverted
Shaft diameter 16 mm
Chassis/levelling aluminium/yes
Turntable levelling yes
Motor 1 DC ( three phase)
Belt material special
External power supply yes
Speeds 33, 45, 78 ( see page 10)
Armboard yes
No. of tonearms 1
Suspended special
Dimensions 610x500x290
Finishes black
Clamp yes
Mat yes
Lid yes
Accessories oil, Allen keys
Options: armboards
Optional: various predrilled armboards (SME, Graham, Triplanar, Ikeda, Ortofon,…)
Safety Precautions:
Electrical connection to the motor controller unit (PS DC) from the mains comes via the
cable. Please keep PS DC away from moisture and be careful not to damage the mains cable.
The same precaution applies to cables feeding the turntable motor and front panel.
Basic Setup
Note: The turntable is packed in two wooden crates.
Note: Be careful when inserting the top plate into the main frame
Note: Some parts are heavy, so be careful when handling!
Note: Choose a suitable supporting table which can hold over 60 kg without warping.
Note: While the parts are packed in plastic bags for protection, these are not intended to be
strong enough to lift or carry the contents.
Note: Allow ventilation space above the motor controller unit.
4