LABEC AA-22N - Manual (Page 12)

5.2 Start a cycle
When water indication light is off, the machine can be started.
5.2.1Press SELECT to set one of the cycles. The key
toggles between the cycles at 121 ,134 and cotton mode.
One of the indication lights turns on to show the cycle you
selected.(Fig 5-2)
5.2.2 You may select DRY key whether starts the fast sterilization cycle. Press DRY
key, it will reduce the sterilization time. If you press the button"DRY" on the panel, there are
three selections, 1min(with 1min LED on), 5min(with 5min LED on) , and 10min(with two
LEDs off).
5.2.3 After select above settings, put the instruments into the autoclave which need sterilize.
Fig 5-3
Caution: Instruments that are ready to sterilize should
be placed in the tray not touching one another allowing
space for steam to pass through. It is suggested that the
tray holder be used to put the tray with instruments
inside the chamber to avoid scald. (Fig 5-3)
Fig 5-2
Operation manual
SEA Series Steam Sterilizers
8