LABEC J-NBT - Manual (Page 11)

Operation Manual
J-NBT-M-E-09-001(REV.01)
P a g e 1 0
5.functions of controller.
5.1 Name of the controller
" : Display window
# : Increase Value Key
$ : Decrease Value Key
% : Setting key
& : Power ON/OFF switch
5.2 How to set temperature.
1) Turn on power switch
2) Press key one time for 1 second. Press key and key to set required temperature.
3) When setting is finished, pressing key at full length for 2 seconds, and all setup values will be
reset as set values and return to normal mode.
5.3 How to operate
! Check rated voltage of the apparatus as well as check the specification.
! Connect the power plug to the power outlet.
! Fill water about 2/3 depth of bath.
! Set the temperature by 5.2 How to set temperature.
! Turn on the Power switch.
! When temperature rises and reaches the setting temperature, the temperature is controlled
automatically.