Lake Lite LL-SCL-8-CAD - Manual

8” Solar Cleat Lite
MODEL: LL-SCL-8-CAD
Solar Underglow: Model: LL-SDL-UG-X
Description
Lake Lite Inc.
105 W. Simon St.
Laotto, IN 46763
Phone: 260-918-2758
Fax: 260-918-3540
E-mail [email protected]
www.lakelite.com
www.solarmarinelites.com
LIGHT CHARACTERISTICS
Light Source 2-Ultra-High intensity LEDs.
Lumens output 5 Lumens *Varies with Color & Conditions
Available LED Colors White
Light Mode Options Constant
Visible Range 300m-500m+ Varies at viewing Angles
Horizontal Output (degrees) 180 Deg Left & Right
Vertical Divergence (degrees) + 90 Degrees
LED Life Expectancy (hours) > 100,000 hrs
ELECTRICAL CHARACTERISTICS
Circuit Protection Integrated
Nominal Voltage (v) 1.2v
Autonomy (hours) 14-18hrs *On full Charge
Temperature Range -20 to 70 C
SOLAR CHARACTERISTICS
Solar Module Type Multicrystalline or Monocrystalline
Power (watts) 0.25 watts
Solar Module Efficiency (%) 16-17%
POWER SUPPLY
Battery Type High Grade NiCdor NiMh– ECO Friendly
Battery Size 1 x 2/3 AAA
Battery Capacity (mAh) 300 mAhr Depending On Model
Nominal Voltage (v) 1.2v / Battery
Battery Service Life 1-3 years (Varies with local Environment)
Battery Service Access Yes: User Changeable / Replaceable
PHYSICAL CHARACTERISTICS
Body Material Fiber Reinforced Nylon
Lens Material PC
External Lens Design Reflector
Internal Lens design NA
Water Proof Rating IP 68
Mounting Any Flat Surface or EZ-Dock Floating Dock
Height 45mm
Width 203mm
Weight N/A
OPTIONS
Custom Options, Sizes, & Colors Please Contact
Custom Hardware & Mounting Please Contact
* Information subject to change without notice
Lumens
5
Solar Cleat Lite: LL-SCL-8-CAX-X
The 8" Solar Cleat Lite is perfect for your Connect-A-Dock
brand floating dock. A great substitute for existing cleats
where lighting is desired or required. No more stubbed
toes after an evening boat ride. Simple to install and the
unique illuminating effect is sure to impress. Use multiple
units for a safe and aesthetically appealing dock.
The diamond bottom fits exactly into the CAD pocket and
attaches in the same manor as existing CAD cleats. The
bolt patterns are the same as the bolt inserts for the
existing cleats and the same hardware and bolts can be
used.