Leapers Sport Airsoft Multi-Burst M4/90 Combat Shotgun (SOFT-M490L) - Manual (Page 5)

Inner
Step
TO SET THE FIRE/SAFETY
BUTTON POSITION:
Warning! Before you follow the
assembly instruction, make sure
to set the Fire/Safety Button to
the “SAFE” position.
Place the shotgun flat on a table in front of you
with the barrel pointing to the left and the pistol
grip bottom toward you.
The Safety/Fire Button is on the “SAFE” position,
if the Button is “Down” as in Fig. 1.
The Safety/Fire Button is on “FIRE” position, if
the Button is “Up” as in Fig. 2.
To change the Safety/Fire position, press the
button from one side to the opposite side.
BB PELLETS LOADING:
Push Shell Cartridge Compartment Lever
backward as in Fig. 3 to open Compartment
Door and take out the Cartridge.
Load 6mm BBs into the Speed Loader.
Align Speed Loader to the Shell Cartridge
receiving end as in Fig. 4.
Push down on Speed Loader handle to
inject BBs. The Shell Cartridge can hold
up to 30 pellets.
Detach the Speed Loader from Shell Cartridge.
Place the Cartridge’s metal head on the Compart-
ment Door’s Inner Step as in Fig. 5 and close the
door to load the Cartridge.
You can put a backup Magazine into the bottom
of the grip as in Fig. 6.
•
•
•
•
•
•
•
•
•
•
Warning! Always use Precision Ground
Premium 6mm BB Pellets for accuracy
and safety. Never recyle pellets.
Activating the trigger carelessly is extremely
dangerous. Never release the Safety Button
or put your finger on the trigger unless you
are ready to shoot at a target.
Fig. 1 - Safe
Fig. 2 - Fire
Fig. 3 - Lever
Fig. 4 - BB’s
Fig. 5 - Shell
Fig. 5 - Shell
Compartment
Door
Cartridge Compart-
ment Lever
Speed
Loader
Fig. 6 - Spare
05