Casio KL-120 - Manual (Page 25)

E-24
Initializing the Label Printer
If you experience serious malfunction of the Label Printer or if operation fails
completely, try performing the following operation to initialize the printer.
Important!
•
Initializing the Label Printer deletes all memory contents. Make sure you have
a back-up copy of text stored in memory if you need it.
To initialize the Label Printer
1. Turn power off.
2. While holding down the PRINT and SPACE keys, press ON/OFF to turn power
on.
• This prompt confirms whether or not you want to initialize the Label Printer.
I N I I T A
S
L
E
I
T
Z
/
E
E ?
S C
3. Release the PRINT, SPACE, and ON/OFF keys.
4. Press SET to initialize the Label Printer or ESC to abort the reset operation.
The tape width selection screen appears after initialization is complete.
5. Use z and x to select the width of the tape you will use and then press
SET.
FUNC key has been
pressed. Press ESC to clear FUNC key
operation.
E-10
Troubleshooting
•••••
Power Supply
Load a fresh set of AA-size alkaline
batteries (supplied by you).
Adjust display contrast.
Remove batteries and reload them
correctly.
Nothing appears on the display.
Possible Causes Action Page
E-8
E-22
E-8
Battery power is low or
the wrong type of
batteries are loaded in
the printer.
Improper display contrast
setting
Batteries loaded
incorrectly
•••••
Text Input
Cannot input text.
Possible Causes Action Page