Maintenance – Leapers 150 lumen Compact LED Pistol Light, 23mm Head, QD Mount (LT-ELP223Q) User Manual

Page 5

Advertising
background image

8

Specifications

IRB* Replacement

Item Number

LT-ELP223Q

LT-ELP116Q

1. Unscrew the Front Head Cap

counterclockwise to expose the

IRB*.

2. Pull out IRB* from the Flashlight

Head.

3. Follow the above step in reverse

order to install a new IRB*.

Battery Operating Time 2hrs+

2hrs+

Bulb Type

23mm LED IRB 16mm LED IRB

Weight with Batteries

4.9 oz

3.1 oz

Voltage

6V

3V

Length

3.38”

3.15”

Max. Lumen

150 lumens

90 lumens

Focus

Preset

Preset

Battery/Qty

CR123A x 2

CR123A x 1

*IRB -

Integrated Reflector and Bulb

Replacement Parts

(Contact your flashlight distributor for the following replacement parts:)

BAT-LIT880

IRB-ELS016

IRB-EL023

IRB-ELS023

2pc Set of CR123A Lithium

Batteries

16mm 5-function LED IRB

for LT-ELP116Q

23mm LED IRB

for LT-ELP223Q

23mm 5-function LED IRB

for LT-ELP223Q

7

Maintenance

1. Maintain the metal surface of the flashlight by removing any dirt or sand with a soft

brush to avoid scratching the finish.

2. Store the flashlight in a cool dry place when not in use. Be careful to avoid contact with

acid, alkaline or corrosive chemicals.

3. Replace the batteries in your flashlight every few months if it was not used for long

period of time. This insures good working batteries for your light and prevents battery
leakage.

4. Keep a fresh package of batteries next to your flashlight. This gives you back-up

power for your light.

5. Do not store your flashlight in high temperatures. This would damage your flashlight

and may result in battery leakage.

6. Do not put the flashlight head against any surface especially paper or human skin for it

has heat and may result in accidents.

7. Do not leave your flashlight under the seat in your car, or in direct sunlight to avoid over-

heating.

8. Do not attempt to lubricate any part of the flashlight.
9. Do not disassemble the flashlight other than replacing light bulb or pressure switch. Do

not loosen or remove screws or parts. Any such or similar actions will void the warranty.

Front Head Cap

LED IRB

Advertising
This manual is related to the following products: