LEWITT LCT 840 - Manual (Page 6)

Using the mic
LCT 840
Status indicator ③
■
The microphone is in normal working mode if the status indicator is illuminated in white.
■
The microphone is in key-lock mode if the status indicator is not illuminated.
■
The microphone experiences clipping due to high SPL if the status indicator flashes in red.
■ The microphone is in automatic attenuation mode if the status indicator is illuminated in red
■ he microphone indicates the clipping history if the status indicator flashes red and white in an alternating sequence.
Polar pattern selection ④
■
The currently active polar pattern is illuminated in white.
■
Select up to five different directivity characteristics by briefly turning the jog-dial to the right or left.
High pass filter indications ⑤
■ The currently active high-pass filter setting is illuminated in white.
Setting a high-pass filter ⑥
■
High-pass filters can be set by briefly pressing the noiseless high-pass filter push button ⑥.
Settings are: linear, 12 dB / octave at 40 Hz and 6 dB / octave at 300 Hz.
06