LEWITT MTP 240 DM/DMs - Manual (Page 11)

MTP 240 DM / DMs
Regulatory information
LEWITT GmbH declares under its sole responsibility that MTP 240 DM / DMs
complies with the European directive 2004/108/EC. The product has been
tested according to harmonized European standards:
MTP 240 DM / DMs
EN 55013:2001+A1:2003+A2:2006
EN 55020:2007
EN 61000-3-2:2006
EN 61000-3-3:1995+A1:2001+A2:2005
Product testing was carried out by TIMCO Engineering Inc., notified body
number 1177.
LEWITT GmbH hereby declares under its sole responsibility that
has been tested and conforms to the following
FCC and ANSI standards:
FCC Part 15:2008 Section 15.109
ANSI C63.4:2003
Product testing was carried out by INTERTEK Testing Services Shenzhen Ltd.
WEEE note: Electronic waste has to be collected separately. Please bring
this device to a local recycling center at the end of its life time.
Manufacturers signature:
Date: 18th November 2010 DI Roman Perschon
Place: Vienna, AUSTRIA CEO – Lewitt GmbH
Declaration of conformity can be downloaded at www.lewitt-audio.com or
obtained from [email protected].
11